DirectUPS vesta pro 1000 vac 사용자 설명서 - 페이지 6

{카테고리_이름} DirectUPS vesta pro 1000 vac에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DirectUPS vesta pro 1000 vac 14 페이지.

Installation and Operation

Installing the UPS is as easy as following the steps shown. Be

aware of the Power Switch must be kept in the "ON" position,

otherwise, the UPS will be disabled and your equipment will not be

protected during a power failure.

1. Inspection

Remove the UPS from its packaging and inspect it for damage that

may have occurred during shipping. If any damage is discovered,

repack the unit and return it to the place of purchase.

2. Placement

Install the UPS unit in any protected environment that provides

adequate airflow around the unit, and is free from excessive dust,

corrosive fumes and conductive contaminants. Do not operate your

UPS in an environment where the ambient temperature or humidity is

high. On the other hand, place the UPS unit away from monitor at least

20cm to avoid interference.

3. Charging

This unit is shipped from the factory with its internal battery fully

charged. however, some energy may be lost during shipping so the

battery should be recharged before using it. Plug the unit into an

appropriate power supply and allow the UPS to charge fully by leaving

it plugged in for 10 hours.