Clarke PC109 작동/안전 지침 매뉴얼 - 페이지 3

{카테고리_이름} Clarke PC109에 대한 작동/안전 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke PC109 8 페이지. Heating torch sets
Clarke PC109에 대해서도 마찬가지입니다: 작동 및 안전 지침 (13 페이지)

페이지 인쇄

ASSEMBLY

NOTE: A bottle of propane gas is required for use with this equipment, capable of

delivering a pressure of 4 bar. (A regulator is provided)

1. Turn the knob on the regulator fully clockwise, then attach the

regulator to the gas bottle, ensuring it is tight.

2. Attach the hose supplied, to the regulator at one end, and the torch at

the other, noting that the hose connections have LEFT HAND THREADS, i.e.

turn them anticlockwise.

3. Attach the appropriate nozzle/burner to the torch where necessary.

If a nozzle/burner is already attached, remove it carefully, complete with

adapter (see illustration below). Unscrew the nozzle from the adapter and

replace with that of the desired type or size. Screw the adapter with nozzle

back on to the torch.

Note:

1. Model PKP411 requires the torch extension to be attached to the torch.

OPERATION

With the hose and regulator attached, and ensuring the gas tap on the torch

is closed, i.e. turned fully clockwise, open the gas regulator valve.

Gas will now be available at the torch, the volume of which will depend

upon the regulator valve opening.

Very gently, open the gas valve on the torch, ensuring the nozzle/burner is

pointing well away from people or property, and apply a flame to the end of

the burner. Model PKP411 is equipped with a piezo electric starter on the

torch extension. Press the button until ignition occurs. Adjust the gas valve

until the desired flame is achieved.

Some models have a control lever attached to the torch. This is used to

further regulate the gas flow and hence the intensity of the flame. When the

lever is released the flame will reduce to a pilot light.

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]