CTM International DLW120 운영 및 설치 매뉴얼 - 페이지 4

{카테고리_이름} CTM International DLW120에 대한 운영 및 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CTM International DLW120 18 페이지. Air extractor & dehumidifier system

STEP 2

From the center of the ¼'' (6 mm), calculate a

distance of 7

'' (194 mm) below the hole and

5/8

make a horizontal line to mark the position of

the top of the upper wall support.

STEP 3

From the outside of the building, using the pre-drilled ¼'' (6 mm) hole as a centre guide, drill a 6 ¼'' (160

mm) hole from the outside to the inside of the house to allow the passage of the evacuation pipe.

STEP 4

Using the provided screws and anchors, fix

the long support to the wall. Then under the

long support fix the short wall support

leaving a

'' (3 mm) space between them.

1/8

STEP5

Still using the provided screws, fix the lower

suction tunnel to the wall support. To start,

screw the two mid screws first