DirecTV Genie 2 활성화 및 장비 반환 지침

{카테고리_이름} DirecTV Genie 2에 대한 활성화 및 장비 반환 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DirecTV Genie 2 2 페이지.
DirecTV Genie 2에 대해서도 마찬가지입니다: 제품 설명서 (19 페이지)

페이지 인쇄
DirecTV Genie 2 활성화 및 장비 반환 지침
ACTIVATION & EQUIPMENT
RETURN INSTRUCTIONS
We're committed to bringing you the best in video entertainment every day. Your replacement
Wireless Genie
®
Mini is enclosed. Here's how to connect and activate it, plus how to return your
non-working equipment.
To avoid non-return fees, follow important return instructions at the end of this document.
1
2
Connect
Reset
1 CONNECT YOUR REPLACEMENT WIRELESS
GENIE MINI
·
Carefully stack your replacement Wireless Genie Mini on top of your non-working Wireless
Genie Mini.
·
Transfer one connection at a time from the non-working receiver to the replacement receiver,
except for the power cord. Need help? Go to
·
Plug the power cord into the replacement Genie Mini, then into a power outlet. If the receiver
doesn't automatically power up, press the POWER button.
·
Turn on your TV. The CONNECTING TO VIDEO BRIDGE screen will appear.
2 RESET YOUR REMOTE
·
On the remote, press and hold MUTE and SELECT.
·
The GREEN LED will blink twice.
·
Press 9-8-7 on your remote.
·
The GREEN LED will blink four times if successful.
3 SETUP
Go to the Genie 2 Server.
·
Press and release the ADD CLIENT button on top of your server. The button will start
flashing GREEN.
Note: The ADD CLIENT button will time out in 20 minutes. If you need more time, press it again.
Go back to your replacement Wireless Genie Mini connected to a TV:
·
You should see the CONNECT TO VIDEO BRIDGE screen.
·
If the signal quality is good or excellent, select CONNECT NOW; otherwise, try moving the client
closer to the Genie 2 Server or call Customer Care at 800.531.5000.
·
Select REPLACE A LOCATION, then choose the Client you want to remove, and select REPLACE.
Confirm your choice by selecting YES, REPLACE.
Note: The new Genie Mini may display a flashing red LED and the screen may flash gray
intermittently during this setup step.
·
The guided setup is complete. Select WATCH TV.
3
4
5
Setup
Activate
Program
directv.com/equipmentinstall
Wireless Genie Mini with Genie 2
6
Return
1
2
3
4
Instructions can be found online at
directv.com/equipmentinstall
or
by scanning the QR code.
Wireless Genie Mini
NETWORK
DOLBY
DIGITAL
IMAX
HDMI
HDMI
10-pin single
Colored cable ends
end connects
connect to the TV
to the receiver
Black component
Gray component
cables are for video
cables are for audio
Remote
Reset
Connecting to Video Bridge
Video Bridge Survey Mode should be active before attempting
to connect.
Inactive
Video Bridge Survey Mode:
Wireless Signal Strength:
Waiting
Signal Quality:
Connect Now
Setup Instructions
Replace a Location
Create a New Location
Select whether you would like to add a new location or replace an
existing location.
Add a New Location
Replace a Location
(Continued on back)
R