Claro CFCLSU2WHABS 설치 매뉴얼 - 페이지 8

{카테고리_이름} Claro CFCLSU2WHABS에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Claro CFCLSU2WHABS 15 페이지.

3. Feed the main motor wire plug up through the inside of the downrod, then insert the downrod

into the motor bush. Gently push the cross-pin through the holes aligned with the base of the

motor bush and downrod. CAUTION: DO NOT force the cross-pin, gently wiggle and rotate it

until it glides through both holes. Replace the cotter-pin on the other side of the cross-pin to

secure the downrod to the motor bush. Tighten up both cross screws to make the downrod rigid in

the motor bush.

4. Snuggle the coupling cover down onto the top of the motor housing. CAUTION: DO NOT

remove rubber gasket on top of the coupling cover.