clarsen H038 사용 지침

{카테고리_이름} clarsen H038에 대한 사용 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. clarsen H038 2 페이지.

EZ Skirting Board Cleaner

H038

v01: 04/09/20

Please read and retain these instructions for future reference

Dimensions

10 x8 x106cm extending up to 170cm

•

HAVE YOUR SKIRTING BOARDS LOOKING LIKE NEW AGAIN!

•

CLEANING SKIRTING BOARDS CAN BE A REAL PAIN FROM HAVING TO BEND DOWN TO

CLEAN OR CRAWLING ALONG ON YOUR KNEES

•

BUT WITH OUR EZ SKIRTING BOARD CLEANER YOU NO LONGER HAVE TO BREAK YOUR

BACK! SIMPLY WALK ALONG AND GLIDE THE PAD ALONG THE SKIRTING BOARDS

•

YOU CAN USE DRY FOR A QUICK DUST OR WET TO REALLY GET THEM GLEAMING

•

THE HANDLE EXTENDS UP TO 170CM SO YOU CAN REACH HIGH AS WELL AS LOW

•

THE CLEVERLY DESIGNED MICROFIBRE HEAD IS SHAPED PERFECTLY TO GET INTO EVERY

GROOVE OF YOUR SKIRTING BOARD

•

SWIVELLING HEAD FOR CLEANING AT ANY ANGLE

•

COMES WITH 3 REPLACEABLE MICROFIBRE HEADS

1. Start by connecting the lower handle to one of the middle handles. Make sure that the holes of the

lower handle are aligned with the buttons on the middle handle.

2. Connect the second middle handle to the end of the assembly. Make sure that the holes of the first

middle handle are aligned with the buttons of the second middle handle.

3. Next, connect the top handle to the end of the middle handle. Make sure that the holes of the middle

handle are aligned with the buttons of the top handle.

4. Attach the head of the cleaner by screwing it onto the lower handle.

5. If you need to clean the cleaning pad, simply peel it from the head unit. Replace the cleaning pad by

attaching the back of it to the head.