3Com NBX 100 릴리스 노트 - 페이지 6
{카테고리_이름} 3Com NBX 100에 대한 릴리스 노트을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com NBX 100 11 페이지. Business telephone
3Com NBX 100에 대해서도 마찬가지입니다: 릴리스 노트 (8 페이지), 빠른 참조 매뉴얼 (2 페이지), 소프트웨어 업그레이드 지침 (4 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지)
페이지 인쇄
3Com NBX Networked Telephony Systems, NBX R6.0.14 Release Notes
Problems Corrected in NBX R6.0.14
On a V3000 that is running the new file system, NBXFSV2, an attempt to record a morning greeting a
second time no longer fails with the message, "Could not record. Please try again later." (ID 46184)
Calls that are handled by an NBX Analog Terminal Adapter (ATA) or by a Legacy Link (Citel) Card
are now able to talk to an IVR system. (ID 46508)
Problems Corrected in NBX R6.0.13
Support for the V3000 BRI and 3C10601B BRI Cards has been updated so that BRI channels no
longer sometimes fail to initialize or go offline after a call when connected to a PSTN line that
deactivates the D channel when not in use. (ID 46160)
Problems Corrected in NBX R6.0.12
The extend wrap-up time feature no longer causes an extension to be disabled from further
participation in calls to the group. (ID 45821)
The field that displays the state of the call is not always accurate. For example, a call comes into an
ACD Calling Group that is configured with some wrap-up time. The call is answered. After the agent
hangs up, the ACD Desktop Statistics display shows the other group phones to be in ringing state.
(ID 45852)
When you hang up after making a call from the TSP tab of the Media Driver Configuration wizard, the
program no longer suspends operations. (ID 45952)
When the pcXset™ Soft Telephone Client is installed on a PC with a processor speed of 800 MHz or
lower, calls that use the G.729 codec can have unacceptable audio quality. To support the pcXset
Soft Telephone Client, 3Com recommends a PC with a processor speed of at least 1.8 GHz. This
information has been added to the online Help for the pcXset configuration wizard. (ID 32710)
The pcXset Soft Telephone Client online Help now includes the correct descriptions of the keyboard
shortcuts to access SA buttons. (ID 32918)
When a forwarded call arrives at an extension that is a primary bridged extension, the call reason
information returned via lineGetCallInfo() not indicates that the call was forwarded.
(ID 33048, ID 33049, ID 33050)
The Ethernet 2 port now functions as a redundant uplink port in the event of a link failure on Ethernet
1. (ID 45906)
Problems Corrected in NBX R6.0.6
The Application LCD Text (ALCD) feature allows a TAPI application to replace part of the display on a
LCD-equipped 3Com phone with a string. An ALCD string should be sent only when a call is offering,
proceeding, or connected. A "success message" (NBXUPDATELCDFORCALL_COMPLETED) is no
longer erroneously returned by the NCP to the TAPI application when the phone is in DIALTONE
state. The NCP now returns NBXUPDATELCDFORCALL_NOTONCALL. (ID 29557)
If you park a call from a 3103 Manager's Telephone and then unpark that call from the same
telephone, ALCD text now appears on the telephone's display panel. (ID 25008)
You can now use a phone that is associated with a computer running Desktop Call Assistant to invoke
the Message Waiting Indicator (MWI) and the Supervisory Monitoring features. (ID 29430 and
ID 29432)
You can now use a phone that is associated with a computer running Complement Attendant
Software (CAS) to invoke the Message Waiting Indicator (MWI) feature. (ID 25237)
Page 6