DirecTV Digital Satellite Recorder 문제 해결 매뉴얼 - 페이지 12

{카테고리_이름} DirecTV Digital Satellite Recorder에 대한 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DirecTV Digital Satellite Recorder 19 페이지.

How do I connect a cable or antenna signal to my receiver?

DIRECTV ® Digital Satellite Recorders are designed to work exclusively with DIRECTV ®

programming. If you also have cable or antenna channels that you want to watch, you can view

them by connecting your receiver as described below. Please note that you will not be able to use

DIRECTV ® Digital Video Recording (DVR) functions or record programs from your cable or

antenna channels.

DIRECTV Digital Satellite Recorder

1. Connect the two satellite cables to the two satellite inputs on the DIRECTV Recorder.

2. Run an

RF coaxial cable

from the antenna or cable source on the wall to the

VHF/UHF In connector on the DIRECTV Recorder.

3. Run another

RF coaxial cable

from the RF Out connector on the DIRECTV Recorder to the TV.

To watch your cable or antenna channels, put the receiver in standby mode as follows :

Enter standby mode by going to DIRECTV Central > DIRECTV Menu > Standby. Although the

green power light on the receiver goes out, your receiver will continue to record DIRECTV

programs that you scheduled. While in standby mode, the receiver will pass your unmodified cable

or antenna signal through to your TV. Please note that you will not be able to use features of the

DIRECTV DVR service on your cable or antenna channels.

To resume watching DIRECTV channels and using the features of the DIRECTV DVR

service:

Press the DIRECTV button on your remote control. The green power light goes on and all

DIRECTV DVR service features are now available.

Page 12