DirekTronik 25-0564 운영 매뉴얼 - 페이지 8
{카테고리_이름} DirekTronik 25-0564에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DirekTronik 25-0564 10 페이지. 60km hdmi2.0 extender over fiber 4k@60hz yuv4:4:4, hdr
페이지 인쇄Operating Instructions
Connecting and Operating
1. Assemble modules with single/multi mode, single/duplex fiber to the HDMI
Extender.(4Kx2K requires 10G module)
2. Connect the HDMI input source to input port of the Transmitter of the Fiber
Extender by HDMI cable. (Max. 3M for 4K@60Hz, YUV 4:4:4, 8bit‐HDR).
3. Connect the duplex fiber optic or Bi‐directional single fiber cable to HDMI
transmitter and receiver to read the EDID from HDMI Display (Optional).
4. Connect LC‐LC single/multi mode single/duplex fiber optic cable between the
Fiber port of transmitter and Fiber port of receiver.
5. Connect HDMI display to the HDMI Receiver.
6. Connect RS232 cable with the computer on the Transmitter side.
Connect RS232cable with the RS232 device on the Receiver side.
7. Connect the included 12V DC power supplies to the locking power receptacle.
8. Power up the HDMI Extender, sources and displays.
Attention: Insert/Extract cable gently
Typical Application
8