Clarus DUET 소유자 매뉴얼 - 페이지 8

{카테고리_이름} Clarus DUET에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarus DUET 13 페이지.

TMOV

The Duet protects from surges with highly sophisticated Thermal Metal Oxide Varistors (TMOV). If the surge

suppression circuit is compromised the front panel Protection Fault LED will illuminate and the unit will shut down for

safety.

GROUND POST

A dedicated ground post on the rear panel allows for the grounding of other sensitive electronics within the system.

SIDE PANEL MAIN POWER SWITCH

For safety, the Duet incorporates a heavy duty 30amp main power switch on the side of the chassis.

SIDE PANEL CIRCUIT BREAKER

If the Duet experiences an incoming current in excess of 15A, the side panel circuit breaker will trip and disconnect the

mains power. To reset the breaker simply push RESET.

OUTLET POWER STATUS

A blue LED is provided on the top panel of the Clarus Duet to indicate status of the outlets. When the Power LED is

illuminated it means power status of the outlets is ON.

PROTECTION FAULT LED STATUS If the PROTECTION FAULT LED illuminates it means the Surge Suppression

electronics have been compromised and the unit will no longer be passing power to the outlets.

POLARITY & GROUNDED LED STATUS

Polarity and Grounded LEDs will illuminate to indicate that the AC outlet into which the Clarus Duet is connected is

wired correctly. If the GROUNDED LED does not illuminate the power cord and the outlet into which the Clarus Duet is

connected are not properly grounded. If the Polarity LED is not illuminated when the front panel power switch is

activated the White and Black AC wires of the outlet into which the Clarus Duet is connected are reversed.

DO NOT OPERATE YOUR CLARUS DUET WITH A LINE PROBLEM. IF THE POLARITY or GROUNDED LED

DOES NOT ILLUMINATE, DISCONNECT THE UNIT IMMEDIATELY. A LICENSED ELECTRICIAN WILL NEED TO

REPAIR THE FAULTY WIRING PRIOR TO RECONNECTING THE CLARUS DUET.

CLARUS DUET Owner's Manual

6448 Pinecastle Blvd. Suite 101, Orlando FL 32809

Page 6