Lenovo 10LL 사용자 설명서 - 페이지 11

{카테고리_이름} Lenovo 10LL에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 10LL 40 페이지.

Part 4: Install the Kensington-style cable lock (optional).

With the key of the Kensington-style cable lock, attach the lock to the security-lock slot on the rear panel of your

computer as shown. The lock secures your monitor to a desk, table, or other non-permanent fixture. It also locks the

3-in-1 cable so that the Tiny cannot be removed from the monitor.

Connecting cables

After assembling your monitor, you must connect cables correctly to use the monitor and computer. Your

monitor can be used with either the Tiny installed in the monitor or an external desktop computer. To connect

cables, do one of the following:

If you use the Tiny installed in the monitor, connect the ac power adapter cable and power cord that comes

●

with the monitor. First connect the ac power adapter cable to the ac power adapter connector on the monitor.

Then, connect one end of the power cord to the ac power adapter and the other end to a properly-grounded

electrical outlet.

If you use the external desktop computer, do the following:

●

1. Use a DisplayPort cable of this type as shown. Connect one end of the DisplayPort cable to the DisplayPort

connector on the monitor and the other end to a DisplayPort connector on the computer. To locate the

DisplayPort connector on the monitor, see "Locating connectors and controls on your monitor" on page

ThinkCentre Tiny-in-One 24 User Guide