Clarus Technologies PCS-25 운영자 매뉴얼 - 페이지 12

{카테고리_이름} Clarus Technologies PCS-25에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarus Technologies PCS-25 16 페이지. Cleaning stations
Clarus Technologies PCS-25에 대해서도 마찬가지입니다: 운영자 매뉴얼 (14 페이지)

페이지 인쇄
Clarus Technologies PCS-25 운영자 매뉴얼
2. Unplug the unit from wall receptacle.
3. Remove any soak tanks or supplies located on the working surface.
4. To create access to the filter canister lids for the Cleaner, lift and remove filter access
cover cutout located on left side of work surface. (Older models require a filter wrench
to twist the filter canister lid). Screw off filter canister lid.
4. With the lid off, carefully pull the used filter out of the canister. Rest the used filter
on the working tray to allow it to fully drain.
5. Place a new (Clarus Stock# WP680SR) filter in the canister.
6. Inspect the lid o-ring for wear, replace if needed. Apply a generous amount of
petroleum jelly or grease to the lid o-ring.
7. Replace lid, screwing the lid on hand tight, then one more quarter turn. Do not
overtighten.
8. If lid wrench as used, return it to its proper location. Replace the filter access cover
cutouts.
12