Clarus Technologies PCS-25 운영자 매뉴얼 - 페이지 3

{카테고리_이름} Clarus Technologies PCS-25에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarus Technologies PCS-25 16 페이지. Cleaning stations
Clarus Technologies PCS-25에 대해서도 마찬가지입니다: 운영자 매뉴얼 (14 페이지)

페이지 인쇄

1. This manual describes the procedures required to operate the Clarus PARTS

WASHING/WEAPONS CLEANING SERIES. Every effort has been made by

Clarus Technologies, LLC to assure the accuracy and reliability of the information

contained in this document. Clarus Technologies, LLC, however, makes no

representation, warranty, or guarantee in connection with this manual and hereby

expressly disclaims any liability or responsibility for loss or damage resulting from

its use or for the violation of any federal, state, provincial or municipal regulation

with which this publication may conflict.

The electrical components of the Clarus Parts/Weapons Cleaning Series have been

designed and assembled with UL-approved equipment where required.

WARNING

! The operational techniques used with this equipment are more

important than the design of the equipment for the safety of the worker.

Therefore, each technician involved in the operation of the Clarus

Parts/Weapons Cleaning Series must have the proper hazardous materials

training.

DANGER!

This system can only be used with solvent that has a minimum

flashpoint of 140 Fahrenheit. Use of solvents with flashpoints lower than 140

Fahrenheit are likely to cause a fire, injuries or death. If you are not sure of a

solvents flashpoint refer to the appropriate material safety data sheet

("MSDS") sheet.

3. Clarus is not undertaking to meet the duties of employers to warn and properly train

and equip their employees, and others exposed, concerning health and safety risks

and precautions, nor undertaking their obligations under local, state, provincial or

federal laws.

4. Information concerning safety and health risks and proper precautions with respect to

particular materials and conditions should be obtained from the employer, the

manufacturer or supplier of that material, or MSDS.

FOREWORD