Clarus Technologies PCS-25 운영자 매뉴얼 - 페이지 14

{카테고리_이름} Clarus Technologies PCS-25에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarus Technologies PCS-25 14 페이지. Cleaning stations
Clarus Technologies PCS-25에 대해서도 마찬가지입니다: 운영자 매뉴얼 (16 페이지)

페이지 인쇄
Clarus Technologies PCS-25 운영자 매뉴얼
F.

Canister Lids difficult to remove and install:

1. Lube lid o-ring and threads with petroleum jelly (note: always apply petroleum
jelly to o-ring with every filter change).
G.

Sight Glass dirty or clogged:

1. Blow clean with air gun or fluid nozzle (opening is inside tank just above pan
opposite sight glass).
2. Replace with new clear hose (Tygon 3/8" ID).
H.

Main Pump not running:

1. Check power cord, is it plugged in to electric box on lower shelf?
2. Plug pump into extension cord.
I.

Pump running but not pumping fluid:

1. Remove fluid from tank, remove intake and discharge hose from pump. Use
compressed air to clear hoses.
2. Remove front cap on pump and check for debris or wear. Replace if necessary.
J.

Main Pump leaking:

1. Inspect for damage.
2. Remove front head assembly and inspect for proper assembly, blow clean with
air gun and reassemble.
K.

Sludge Pump leaking:

1. Inspect for cracks, damage or wear
L.

Plumbing leaking:

1. Tighten hose clamps.
2. Check all hose connections and hoses for wear or damage and replace if
necessary.
3. Remove plumbing fitting and re-tape with Teflon tape. Re-install and tighten.
M.

No Power Main Pump, Light, Soak Tank Pump do not work:

1. Confirm power to wall outlet.
2. Check fuse (10Amp) on lower box.
14