CLAS OH 5311 빠른 시작 매뉴얼 - 페이지 7
{카테고리_이름} CLAS OH 5311에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CLAS OH 5311 12 페이지. High elevation hydraulic floor jack 3t
페이지 인쇄
OH 5311
HIGH ELEVATION HYDRAULIC FLOOR JACK 3T
CAUTION
1. Never adjust the setting valve.
2. Do not use on sloping ground.
3. Always use stands/ramps to secure the raised vehicle.
4. Check that the load is supported in the centre of the head.
5. Never exceed the maximum weight indicated 3T.
6. Any modification made to the product voids the guarantee and jeopardizes the safety of the
user. No parts must be changed.
7. Only lift your vehicle in the areas recommended by the vehicle manufacturer.
8. Do not use in difficult conditions such as: extreme climate, application under frost, fields, etc.
powerful magnets, explosive atmosphere, mines...
9. If the jack fails, do not handle the jack any more and make sure you are not in danger.
10. Do not put the jack in direct contact with food.
11. In the event of oil spillage, clean up immediately to avoid any accident.
12. This appliance is designed for lifting vehicles only (not exceeding the indicated load).
do not lift dangerous materials such as molten metals, acids, radiating materials, fragile loads...do
not lift people with the jack.
13. During any movement, it is important to have a good overall view of the lifting device and the
load.
14. The use of special brackets is recommended to protect the vehicle.
15. When handling the jack, it is recommended to be equipped with appropriate clothing: gloves,
safety shoes...
16. Do not work under the lifted load without securing it with appropriate means: jack stands,
wedges...
USE
Lifting the jack
1. Place the jack under the vehicle at the level of the spaces provided for this purpose (see
manufacturer's manual).
Make sure that the head is well centred on the slots to avoid any slipping.
2. 2. Using the lever, tighten the safety valve to the right. Then move the lever up and down to raise
the load. Lock the screw to allow lifting.
For your safety, once the vehicle is raised, remember to add candles underneath the vehicle.
Lowering the jack
1. Gradually turn the safety valve two turns from right to left.
2. Unlock the screw to allow the lifting arm to be lowered.
Do not unscrew the safety valve completely, as oil will escape!