CLAS OC 9100 사용 설명서 - 페이지 13

{카테고리_이름} CLAS OC 9100에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CLAS OC 9100 16 페이지. Rear parking sensor punh master tool kit

REAR PARKING SENSOR PUNCH MASTER TOOL KIT
OC 9100
FORD (23 PCS)
• At this point the drive unit with the thread is first inserted into the matrix' coupling and then screwed by hand.
(Fig. 6)
Warning: before starting the punching operation, make sure that the mark is oriented exactly as shown in
the figure on the inside of the bumper.
5
• To perform the punching, connect the 3/8" ratchet wrench provided in the tool set. Act on the ratchet wrench
to punch the hole (Fig. 7), which will result in a custom hole for the specific sensor support. (Fig.8+9)
• Then install the sensors in the bumper.
7
9
6
8