CLAS OE 6047 매뉴얼 - 페이지 10
{카테고리_이름} CLAS OE 6047에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CLAS OE 6047 16 페이지. Hot air gun 50-650 c
HOT AIR GUN 50-650°C
OE 6047
GENERAL SAFETY
Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric
shock, re and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in
the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool.
Package
• Remove all packing materials
• Check the completeness of the packing content
• Check the appliance, the power cord, the power plug and all accessories for transportation damages.
• Keep the packaging materials as far as possible till the end of the warranty period. Dispose it into your local
waste disposal system afterwards.
• Warning: Packing materials are no toys! Children must not play with plastic bags! Danger of suffocation!
Work area
• Keep work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
During use
• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodi ed plugs and matching outlets will reduce risk of electric shock.
• Avoid body contract with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric
shock.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable
for outdoor use reduces the risk of electric shock.
• If operating a power tool on a damp location is unavoidable, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
clas-equipements.com