Lenovo ThinkCentre M58 매뉴얼

{카테고리_이름} Lenovo ThinkCentre M58에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkCentre M58 4 페이지. (simplified chinese) power manager deployment guide
Lenovo ThinkCentre M58에 대해서도 마찬가지입니다: 브로셔 (4 페이지), 배포 매뉴얼 (44 페이지), 배포 매뉴얼 (44 페이지), 배포 매뉴얼 (24 페이지), (영어) 배포 가이드 (46 페이지), (이탈리아어) 배포 매뉴얼 (44 페이지), (독일어) 구현 매뉴얼 (46 페이지), (일본어) 배포 매뉴얼 (44 페이지), 배포 매뉴얼 (42 페이지)

In this guide we are providing you with instructions for manual Windows XP install (from CD) and

Remote Install Service instructions to integrate the M58/M58p SATA and Ethernet driver for image

deployment.

‐Manual Install:

This section will give you step by step instructions on installing Windows XP SP2 on a Lenovo

M58/M58p, it was done using a 7483‐ACU and BIOS version 5CKT34A, with default values.

Before you start you will have to create the mass storage driver diskette, download the latest driver

package at

http://www-307.ibm.com/pc/support/site.wss/MIGR-70696.html

the following one to your formatted diskette:

‐

iaahci.cat

‐

iaAHCI.inf

‐

iastor.cat

‐

iaStor.inf

‐

iaStor.sys

‐

TXTSETUP.OEM

Make sure your M58/M58p has either an internal or USB floppy drive so that you can specify which

drivers to use.

1. Boot your computer from the Windows XP media

2. Press "F6", when prompted, to specify additional devices

*It's possible that Windows XP will not be able to find your computer type (HAL) if you're

prompted to select one please make sure to choose "ACPI Multiprocessor PC"

3. Choose the "Intel(R) ICH10D/DO SATA AHCI Controller" from the list, you might have to scroll

up or down to get to this choice.

Installing Windows XP on M58/M58p

once the files extracted copy