Power Control
The Power Control menu enables you to configure the ME power control policies.
To conform with the ENERGY STAR program and the EuP Lot 6 requirements, the
Intel ME can be turned off in various sleep states. Select Power Control and press
Enter. The INTEL(R) ME POWER CONTROL window opens. In the INTEL(R) ME
POWER CONTROL window, the following options will be displayed.
1. M-off: An Intel ME FW power state when the Intel ME FW is shut down.
2. M0: An Intel ME FW power state when the Intel AMT computer is turned on and operational.
3. M3: An Intel ME FW power state when the Intel AMT computer is in sleep mode, hibernation mode, or turned off.
18
ThinkCentre M90p with Intel AMT Configuration Guide
Option
Intel(R) ME ON in Host
Sleep States
Idle Timeout
Used to specify when the Intel ME will be turned on. Select
Intel(R) ME ON in Host Sleep States and press Enter. You can
choose which power package will be used.
v Desktop: ON in S0 – This option means only when your
computer is turned on and operational will the Intel ME be
turned on.
v Desktop: ON in S0, ME Wake in S3, S4-5 – This option
means the Intel ME will be turned on when your computer
is turned on and operational. The Intel ME can be remotely
woken up when your computer is in sleep mode,
hibernation mode, or turned off.
With Intel ME Wake on Lan (WOL), after the time-out timer
expires, the Intel ME remains in the M-off
command is sent to the Intel ME. After this command is sent,
the Intel ME will transition to the M0
respond to the next command. A ping to the Intel ME can also
make the Intel ME transition to an M0 or M3 state. Intel ME
takes a short time to transition from the M-off state to the M0
or M3 state. During this time, the system will not respond to
any Intel ME commands. When the Intel ME is in the M0 or
M3 state, the system will respond to Intel ME commands.
Used to enable the Intel ME to wake up and define the Intel
ME idle timeout in the M3 state. The idle timeout value
indicates the amount of time that the Intel ME is allowed to
remain idle in the M3 state before transitioning to the M-off
state. The idle timeout value should be entered in minutes.
Note: If the Intel ME is in the M0 state, it will not transition to
the M-off state.
Description
1
state until a
2
3
or M3
state and will
페이지 인쇄