Lenovo ThinkCentre M92p 구성 매뉴얼 - 페이지 32
{카테고리_이름} Lenovo ThinkCentre M92p에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkCentre M92p 38 페이지. Intel active management technology configuration guide
Lenovo ThinkCentre M92p에 대해서도 마찬가지입니다: 배포 매뉴얼 (36 페이지), 사양 (2 페이지)
페이지 인쇄
6. In the INTEL(R) ME NETWORK SETUP window, select TCP/IP Settings and press Enter. Configure
TCP/IP settings in the TCP/IP SETTINGS window.
7. In the INTEL(R) AMT CONFIGURATION window, select Remote Setup And Configuration ➙ TLS PKI
➙ Manage Hashes. Press Insert and then set up your own certificate hashes.
8. In the INTEL(R) AMT CONFIGURATION window, select Remote Setup And Configuration ➙
Provisioning Server IPV4/IPV6. Enter the proper value if needed.
9. In the INTEL(R) AMT CONFIGURATION window, select Remote Setup And Configuration ➙
Provisioning Server FQDN. Enter the proper value if needed.
10. In the INTEL(R) AMT CONFIGURATION window, select Remote Setup And Configuration ➙ RCFG.
11. Select Start Configuration and press Enter. Press Y when prompted.
12. Select MEBx Exit in the Intel MEBx MAIN MENU window to exit the MEBx.
13. Log on to the client through a Web browser on the management console. See "Logging on to the client"
on page 20. If you can access the Web user interface, Intel AMT is correctly configured.
USB provisioning
This section provides instructions on how to use the USB provisioning method.
1. Repeatedly press and release the F1 key when turning on the Intel AMT computer. When you hear
multiple beeps or see a logo screen, release the F1 key. The Setup Utility program starts.
2. From the Setup Utility program main menu, select Advanced ➙ Intel(R) Manageability ➙ Intel(R)
Manageability Reset. Select Enabled and press Enter.
3. Press F10 to save your settings and exit the Setup Utility program. The computer will restart to reset
all Intel ME settings to factory default settings.
4. Press Y when you are prompted to continue with the Intel ME unconfiguration.
5. Format your USB memory key into FAT format.
Note: The capacity of USB memory key should be no more than 2 GB.
6. Use an ISV application to create a USB key file named setup.bin on the management console.
7. Export the setup.bin file to your USB memory key.
8. Connect the USB memory key to your Intel AMT computer and restart your computer from the USB
memory key.
9. You will receive a message ²Found USB Key for provisioning. Continue with Auto Provisioning (Y/N).²
Press Y and then the USB provisioning will be automatically completed.
10. Log on to the client through a Web browser on the management console. See "Logging on to the client"
on page 20. If you can access the Web user interface, Intel AMT is correctly configured.
24
ThinkCentre M92/p and M92z Intel Active Management TechnologyConfiguration Guide