Lenovo ThinkCentre Types 8342 하드웨어 교체 매뉴얼 - 페이지 20

{카테고리_이름} Lenovo ThinkCentre Types 8342에 대한 하드웨어 교체 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkCentre Types 8342 44 페이지. Lenovo personal computer hardware replacement guide

페이지 인쇄

11. On the new system board, release and pivot the locking lever, then pivot the

12. Position the microprocessor so that the notches on the microprocessor are

13. Using the vacuum pen 1 , lower the microprocessor straight down into the

14. Position the heat sink on the heat sink mounting bracket and align the four

Hardware Replacement Guide

microprocessor retainer until it is open.

Note: There will be a black plastic cover on the retainer to protect the

microprocessor socket. As you close the microprocessor retainer, remove the

black plastic cover. Place the black plastic cover on the microprocessor retainer

of the defective system board.

aligned with the tabs in the microprocessor socket.

Important

To avoid damaging the microprocessor contacts, do not tilt the

microprocessor when installing it into the socket.

microprocessor socket, and secure the microprocessor.

holes of the heat sink with the holes on the system board.