Lenovo ThinkStation E31 배포 매뉴얼 - 페이지 21
{카테고리_이름} Lenovo ThinkStation E31에 대한 배포 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkStation E31 36 페이지. Avid workstation tower/sff single quad core cpu qualified for software only symphony 6.x, media composer 6.x, & newscutter 10.x
Lenovo ThinkStation E31에 대해서도 마찬가지입니다: 구성 매뉴얼 (15 페이지)
페이지 인쇄
Chapter 3. Typical Usage
Listing current BIOS settings
Changing BIOS settings
Changing the boot order
@Copyright Lenovo 2012
Through WMI, you can configure BIOS settings in the
following ways:
·List BIOS settings
·Change BIOS settings
· Change the boot order (sometimes referred to as the startup
sequence)
·Load default BIOS settings
For a list of all available BIOS settings that can be changed
through
WMI
on
Lenovo_BiosSetting class (see "List all BIOS settings on the
local computer" on page 20 and "List all BIOS settings on a
remote computer" on page 22 for sample scripts).
See Table 4 on page 6 for a list of available BIOS settings.
To change a BIOS setting, complete the following steps:
1.
Identify the BIOS setting you want to change using the
Lenovo_BiosSetting class (see "List all BIOS settings on the local
computer" on page 20 and "List all BIOS settings on a remote
computer" on page 22 for sample scripts).
2. Identify the value to which the setting will be changed.
Note: See Table 4 on page 6 for a list of available values for a
particular setting.
3.
Change the BIOS setting to the desired value using the
Lenovo_SetBiosSetting class, then use the Lenovo_SaveBiosSetting
class to save the settings (see "Set a single BIOS setting on the local
computer" on page 20 and "Set a single BIOS setting on a remote
computer" on page 22 for sample scripts).
Note: BIOS settings and values are case sensitive.
After making changes to the BIOS settings, you must reboot the
computer before the changes will take effect.
To change the boot order, complete the following steps:
Determine the current setting for "BootOrder" by using the
1.
a
specific
computer,
use
the
13