Lenovo ThinkStation P500 구성 매뉴얼 - 페이지 3

{카테고리_이름} Lenovo ThinkStation P500에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkStation P500 49 페이지. How to create and configure raid arrays
Lenovo ThinkStation P500에 대해서도 마찬가지입니다: 하드웨어 구성 (35 페이지), 안전, 보증 및 설정 매뉴얼 (2 페이지)

페이지 인쇄

2. Configuring RAID Arrays

Configuring RAID arrays using the onboard Intel S-SATA controller

Legacy BIOS Method

Use this method to create a basic RAID array using the onboard Intel S-SATA controller with the system

BIOS set to Legacy mode.

NOTE: This document shows the BIOS screens in Text Mode. P510/710/910 uses a GUI interface for the

BIOS setup screens by default. The general structure/layout of the BIOS setup screens in GUI Mode are

the same as Text Mode, but will look slightly different.

1. Install the drives for the RAID array into the system.

P500/P510

2. Power on the system and enter BIOS setup using the F1 key when prompted.

P900/P910

P700/P710