Lenovo ThinkSystem SN850 빠른 시작
{카테고리_이름} Lenovo ThinkSystem SN850에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkSystem SN850 2 페이지. Compute node type 7x15
Lenovo ThinkSystem SN850에 대해서도 마찬가지입니다: 제품 설명서 (44 페이지)
페이지 인쇄
Lenovo ThinkSystem SN850 Compute Node
Type 7X15
Quick Start
In the box
SN850 Compute Node
Printed documentation
If any item is missing or damaged, contact your place of purchase.
Ensure that you retain your proof of purchase. They might be
required to receive warranty service.
First glance
Front view: Four 2.5-inch hot-swap HDD or SSD compute node
model
USB 3.0 connector
KVM connector
Drive activity LED (green)
Drive status LED (yellow)
Drive activity LED (green)
Setting up the system
Install the required compute node components.
1.
Install the compute node into the chassis.
2.
Make sure the chassis is connected to power.
3.
Connect the management controller to the network.
4.
Power on the compute node.
5.
Configure the system.
6.
For detailed information about installing hardware options and
configuring the system, see the following website:
http://thinksystem.lenovofiles.com/help/index.jsp
Drive status LED (yellow)
Power button/LED (green)
Identification LED (blue)
Fault LED (yellow)
USB management button
Technical specifications
Dimensions and weight
Height: 55.5 mm (2.2 inches)
Depth: 492.7 mm (19.4 inches)
Width: 435.3 mm (17.1 inches)
Weight:
Minimum: 9.3 kg (20.6 lbs)
Maximum: 12.3 kg (27.0 lbs)
Processor
Your compute node supports the following processor:
®
Intel Xeon
processor scalable family
Standard: Two processors
Maximum: Four processors
Memory
Slots: 48 DIMM connectors
8 GB, 16 GB, and 32 GB RDIMMs
64 GB LRDIMMs
Note: mixing of RDIMMs and LRDIMMs is not supported
Storage
Supports up to four 2.5-inch hot-swap drive bays
Supported drives:
SAS/SATA hot-swap hard disk drives/solid-state drives
NVMe solid-state drives
Networking
Supports up to four I/O adapter slots for connecting to chassis
switch bays
PN: SP47A10202
Printed in China