Lenovo 7X21A00REA 빠른 시작

{카테고리_이름} Lenovo 7X21A00REA에 대한 빠른 시작을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 7X21A00REA 2 페이지. Compute node, enclosure

Lenovo ThinkSystem SD530 Compute Node Type 7X21

Lenovo ThinkSystem D2 Enclosure Type 7X20

Quick Start

In the box

Your shipping box contains the following items:

SD530 Compute Node Type 7X21



D2 Enclosure Type 7X20



Note: There will be one to four nodes per enclosure in the box

depending on your purchase.

Material box, including items such as power cords, printed



documentation and slide-rail installation kit.

If any item is missing or damaged, contact your place of purchase.

Ensure that you retain your proof of purchase and packing material.

They might be required to receive warranty service.

First glance

Note: Your solution might look slightly different from the illustrations.

Enclosure front view: Node bays

Node front view: Six 2.5-inch hot-swap drive model

Node front view: Four 2.5-inch hot-swap drive model

Enclosure rear view: Eight low-profile PCIe 3.0 x8 cards

Enclosure rear view: Four low-profile PCIe 3.0 x16 cards

Installing the solution

To install the solution, do the following:

1. Install the required solution components.

2. Install the enclosure into the rack.

See the Rack Installation Guide that was provided with the rail kit.

3. Connect the cables.

4. Turn on the compute nodes.

5. Connect the management controller to the network.

6. Configure the system.

For detailed information about installing hardware options and

configuring the system, see the following website:

http://thinksystem.lenovofiles.com/help/index.jsp

PN: SP47A24250

Printed in China