Lenovo 7Z73 문제 판단 및 서비스 매뉴얼 - 페이지 5
{카테고리_이름} Lenovo 7Z73에 대한 문제 판단 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 7Z73 15 페이지.
페이지 인쇄
IBM QRadar Appliances Type 4723 Problem Determination and Service Guide
Appendix B.
Replacing Cards and Load Balance Cable for Napatech PCIe Cards in QRadar Network Insights 1920 and 1940 Appliances
Important: This procedure references operations documented as part of standard Lenovo server service operations. These operations
may be found at the following URL:
https://thinksystem.lenovofiles.com/help/topic/SR650V2/sr650v2_maintenance_manual.pdf
Note: Each card has
one
cable connections. One cable connection is required for load balancing function to be enabled. Individual
connectors are keyed to ensure proper plugging of the cable to cards. Cable to be installed onto cards when cards are assembled into
PCI slots
2
and
5
in the 4723-N2A & 4723-N4B appliance.
1.
Read the safety and installation information for the appliance. Exercise care for the handling of static-sensitive devices
as outlined in the installation guidelines during this service operation.
2.
Turn off the appliance and peripheral devices and disconnect the power cords and all external cables, if necessary.
3.
Remove the top cover.
4.
Due to the limited space for cable routing, the PCI Riser Cage should be removed before replacing cards and or cable.
5.
Remove PCI Cage 2 then cage 1. Be careful not to crimp any portion of the cable. PCIe Cage Removal illustrated in
Figure 1.
Figure 1: PCIe Cage Removal
6.
Firmly press the cable assembly connector to the connector on both primary and secondary PCI cards. Cable Plug location
illustrated in Figure 2.
Figure 2: Cable plug location
P/N: 03KE175
EC: P43116B
Page 5 of 15
Origin: MX
Printed in MX