Lenovo ThinkServer 사용자 설명서 - 페이지 19

페이지 인쇄

User Role

Operator

Administrator

Services

You can configure the web server parameters (such as, HTTP Port Number, HTTPS Port Number, and

Timeout) on a remote computer. By default, the timeout is 1800 seconds; 32 for the Max Sessions.

When you finish the configuration, click Apply Changes.

IPMI

This screen contains two sections: IPMI Serial and IPMI Settings.

IPMI Serial

There are three serial configuration in IPMI Serial: Connection Mode Settings, Baud Rate, Flow Control and

Channel Privilege Level Limit.

Option

Connection Mode Settings

Baud Rate

Flow Control

Channel Privilege Level Limit

IPMI Settings

IPMI Settings provides remote configuration over LAN. To activate IPMI remote configuration by LAN, check

Enable IPMI Over LAN option, define the Channel Privilege Level Limit, and enter the Encryption Key.

When you finish the configuration, click Apply Changes.

Option

Enable IPMI Over LAN

Channel Privilege Level Limit

Encryption Key

Description

All BMC commands are allowed, except for configuration

commands that can change the behavior of the out-of

band interfaces. For example, Operator privilege does

not allow the capability to disable individual channels, or

change user access privileges.

All BMC commands are allowed, including configuration

commands. An Administrator can even execute

configuration commands that would disable the channel

that the Administrator is communicating over.

Description

Sets the IPMI serial connection mode from a drop-down

list. Options are Direct Connection Basic Mode and Direct

Connection Terminal Mode.

Sets the IPMI serial baud rate (data speed) from a

drop-down list. Options are 9600 bps, 19.2 kbps, 38.4

kbps, 57.6 kbps and 115.2 kbps.

Sets the Flow control value from a drop-down list.

Available values are None and RTS/CTS Flow control.

Sets the Channel privilege level from a drop-down list.

Available levels are Administrator, Operator and User.

Description

Enables IPMI Over LAN when the checkbox is checked.

Sets the maximum privilege level that can be accepted on

the LAN channel (Administrator, Operator or User).

Sets the Encryption Key. This field allows from 0 to 20

two-digit Hex characters and no spaces.

Chapter 6

ThinkServer Remote Management Module Web Console Options