CTS EPS-3128 Series 사용자 설명서 - 페이지 8
{카테고리_이름} CTS EPS-3128 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CTS EPS-3128 Series 19 페이지. 24 poe+ 10/100/1000base-t rj-45 ports with 4 combo ports (10/100/1000base-t, 100/1000base-x sfp) uplink management switch
페이지 인쇄
4 x 10/100/1000Base-T RJ-45 ports, or
4 x 100/1000Base-X SFP ports
2.
24 x 10/100/1000BASE-T RJ-45 ports (Ports 1-24)
24 x 10/100/1000 PoE ports
3.
LED:
Please refer to chapter
4.
Reset Button:
Pressing reset button for 5~10 seconds then release to restart
the system.
Pressing reset button for more than 10 seconds then release to
reset the Managed Switch back to factory settings and restart
the system.
5.
Console port:
An asynchronous serial console port supporting the RS-232
electrical specification. The console port can be used to
manage the device and the interface should be configured to
9600 , N , 8 ,1
Rear Panel
The Managed Switch features one fixed AC power module and its rated input
supply voltage is from AC 110 to 240V, 50/60Hz.
The rear panel is configured as follows:
1.
AC inlet
The rated input supply voltage is from AC 110 to 240V, 50/60Hz
2.
Power Switch
3.
Grounding Wire Screw
Note: Grounding helps to limit the effects of noise due to electromagnetic
interference (EMI). Be sure to install the ground connection from the ground
screw to the grounding surface before connecting devices with lighting
protector.
3.1 LED Definitions
8