Lenovo 10QX 사용자 설명서 - 페이지 15

{카테고리_이름} Lenovo 10QX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 10QX 49 페이지.

Turning on your monitor and computer

AIO mode, you will use the Tiny. When you select the DP mode, you will use the external

To turn on your monitor and computer, do one of the following:

•

If you only have the Tiny installed in the monitor, press the power button on the monitor

to turn on your monitor and computer. To locate the power button,

connectors and controls on your monitor"on page 1-3.

•

If you only have the external desktop/laptop computer connected to the monitor, press the

power button on the monitor to turn on your monitor. Then, press the power button on the

computer to turn on your computer. To locate the power button, see"Locating connectors

and controls on your monitor"on page 1-3.

•

If you have both the Tiny installed in the monitor and the external desktop/laptop

computer connected to the monitor, do one of the following:

• If you use the Tiny, press the power button on the monitor to turn on your monitor and

computer. To locate the power button, see "Locating connectors and controls on your

monitor"on page 1-3.

• If you use the external desktop/laptop computer, press the mode-switching button on

the monitor to select the DP mode so that the monitor is turned on. Then, press the

power button on the computer to turn on your computer. To locate the mode-switching

button, see "Locating connectors and controls on your monitor"on page 1-3.

Note: When both the Tiny and the external desktop/laptop computer are working, you can

press the mode-switching button to switch between the two computers. When you select the

desktop/laptop computer.

When you switch between the AIO mode and the DP mode, ensure that no data is being

transmitted between your computer and any USB device that is connected to your monitor. If

you switch between the two modes while the USB data is being transmitted, the transmission

will be interrupted and loss of data may result.

When you switch between the AIO mode and the DP mode the following is required to wake

your computer from sleep or hibernation:

•

DP mode to AIO mode. If the Tiny installed in your monitor is in sleep or hibernation

mode, press the power button of the monitor to wake up the Tiny.

•

AIO mode to the DP mode. If the external desktop/laptop computer is in sleep or

hibernation mode, press the power button of the external desktop/laptop computer to

wake up it.

Note: When you switch between AIO mode and DP mode, the keyboard and mouse that are

connected to your monitor are also switched.

see"Locating

1-11

Chapter 1.