Lenovo 10QX 사용자 설명서 - 페이지 20

{카테고리_이름} Lenovo 10QX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 10QX 49 페이지.

Wall Mounting (Optional)

Refer to the instructions that come with the base mounting kit. To convert your LCD display

from a desk-mounted to a wall-mounted display, do the following:

Step 1: Verify that the Power button is turned Off, then disconnect the power cord.

Step 2: Lay the LCD display face down on a towel or blanket.

Step 3: Remove the base and stand from the monitor.

Step 4: Attach the mounting bracket from the VESA compatible wall mounting kit (100mm

x100mm distance), the type of VESA mounting screw is M4 x 10 mm.

Step 5: Attach the LCD display to the wall, and follow the instructions in the wall-mounting

kit.

For use only with UL Listed Wall Mount Bracket with minimum weight/load: 8kg

To enjoy a better monitor performance, it is recommended that you install the monitor driver before using

the monitor.

To install the monitor driver, do one of the following:

•

If the optical drive is available, insert the CD that comes with the monitor into the optical

drive. Then, follow the instructions on the screen.

•

If the optical drive is not available, download the driver from the Lenovo Web site at

http://support.lenovo.com/docs/TIO24Gen3Touch. Then, follow the instructions in

following illustration shows that you can rotate clockwise the monitor at an angel of -5° to

the left and 90° to the right."on page 2-2.

VESA hole

4."The

2-5

Chapter 2.