Lenovo 12NA-GAR1-WW 사용자 설명서 - 페이지 12

{카테고리_이름} Lenovo 12NA-GAR1-WW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 12NA-GAR1-WW 50 페이지.

Setting up your monitor

This section provides information on how to set up your monitor.

Assembling your monitor

To assemble your monitor, follow the two parts below one by one:

Part 1: Install the full-function monitor stand.

Part 2: Install the Tiny.

Part 3: Install the rear Wi-Fi antenna (optional).

Part 4: Install the Kensington-style cable lock (optional).

Part 1: Install the full-function monitor stand.

Note: The full-function monitor stand includes one monitor stand and one stand base.

1. Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your monitor

2. Insert the three metal studs on the base into the corresponding holes in the stand. Then,

3. Insert the two metal tabs on the stand into the corresponding holes on the rear of the

Part 2: Install the Tiny.

1. Press the decorative cover 1 as shown to remove it. Then, press the button 2 to open the

1-7 Flat Panel Monitor User's Guide

and gently lay it down so that the screen is against the surface and the cover is facing

up.

tighten the screw as shown to secure the stand .

monitor. Then, pivot the stand downward until it clicks into position.

cable cover.

Note: Keep the decorative cover for future use.