Lenovo 2448HB6 사용자 설명서 - 페이지 5

{카테고리_이름} Lenovo 2448HB6에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 2448HB6 35 페이지. Wide flat panel monitor

페이지 인쇄

Safety and Maintenance Guidelines

Important Safety Information

The power cord is designed for use with your monitor. To use a different cord, use only a power source and

connection compatible with this monitor.

WARNING:

Always connect your monitor, the computer, and other equipment to a grounded (earthed) power

outlet. To reduce the risk of electric shock or damage to your equipment, do not diable the power cord grounding

feature. The grounding plug is an important safety feature.

WARNING:

For your safety, be sure that the grounded power outlet you plug the power cord into is easily

accessible to the operator and located as close to the equipment as possible. To disconnect power from the

equipment, unplug the power cord from the power outlet by grasping the plug firmly. Never pull on the cord.

CAUTION:

To protect your monitor, as well as your computer, connect all power cords for your computer and its

peripheral devices (such as a monitor, printer, or scanner) to a surge protection device such as a power strip with

surge protection or uninterruptible power supply (UPS).

Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use

a power strip whose manufacturer offers a damage replacement policy, so you can replace your equipment if surge

protection fails.

CAUTION:

A certified power supply cord has to be used with this equipment. The relevant national

installation and/or equipment regulations shall be considered. A certified power supply cord not lighter

than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm²

or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be of synthetic rubber.

Safety Precautions

Use only a power source and connection compatible with this monitor, as indicated on the label/back plate of

■

the monitor.

Be sure the total ampere rating of the products connected to the outlet dose not exceed the current rating of the

■

electrical outlet, and the total ampere rating of the products connected to the power cord does not exceed the

rating of the power cord. Look on the power label to determine the ampere rating (Amps or A) for each device.

Install your monitor near a power outlet that you can easily reach. Disconnect the monitor by grasping the plug

■

firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.

Do not allow anything to rest on the power cord. Do not walk on the cord.

■

While using VESA mount application, the AC Inlet must face to down side. Do not face any other position.

■

Maintenance Guidelines

To enhance the performance and extend the life of your monitor:

Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating

■

properly or has been dropped or damaged, contact your Lenovo authorized dealer, reseller, or service

provider.

Adjust only those controls that are described in the operating instructions.

■

Turn your monitor off when not in use. You can substantially increase the life expectancy of the monitor by using

■

a screen saver program and turning off the monitor when not in use.

Keep your monitor in a well-ventilated area, away from excessive light, heat, or moisture.

■

Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered.

■

Never push objects of any kind into cabinet slots or other openings.

Unplug the monitor from the power outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.

■

Do not drop the monitor or place it on an unstable surface.

■

When removing the monitor base, you must lay the monitor face down on a soft area to prevent it from getting

■

scratched, defaced, or broken.

Cleaning the Monitor

The monitor is a high-quality optical device that requires special care when cleaning. To clean the monitor, follow

these steps:

Turn off the computer and the monitor.

Unplug your monitor from the power outlet before cleaning.

CAUTION:

These chemicals may damage the monitor. Do not use liquid or aerosol cleaners. Never user water to clean an LCD

screen.

Wipe the screen with a dry, soft, clean cloth.

If the screen requires additional cleaning, use an antistatic screen cleaner.

Dust the monitor housing. Use a damp cloth to clean the cabinet.

If the cabinet requires additional cleaning, use a clean cloth dampened with isopropyl alcohol.

Plug in the monitor.

Turn on the monitor and the computer.

Do not use benzene, thinner, ammonia, or any volatile substance to clean the monitor screen or cabinet.