Lenovo 61C7KCR1US 사용자 설명서 - 페이지 28

{카테고리_이름} Lenovo 61C7KCR1US에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 61C7KCR1US 36 페이지.

Manually installing the monitor driver

Below are steps for manually installing the monitor driver in Microsoft Windows 7, Microsoft

Windows 10.

To use the Plug and Play feature in Microsoft Windows 7, do the following:

1. Turn off the computer, all attached devices.

Ensure that the monitor is connected correctly.

3. Turn on the monitor and then the system unit. Allow your computer to start the

Windows 7 operating system.

From the Lenovo website http://support.lenovo.com/docs/S27i_10, find the corresponding

monitor driver and download it to a PC to which this monitor is connected (such as a

desktop).

Open the Display Properties window by clicking Start, Control Panel, Hardware and

Sound icon, and then click the Display icon.

Click the Change the display settings tab.

Click the Advanced Settings icon.

Click the Monitor tab.

Click the Properties button.

10. Click the Driver tab.

11. Click Update Driver, then click Browse the computer to find the driver program.

12. Select Pick from the list of device driver program on the computer.

13. Click the Hard Disk button. By clicking the Browse button, browse and point to the

following path:

X:\Monitor Drivers\Windows 7

(where X indicates "the folder in which the downloaded driver is located" (such as a

desktop)).

14. Select the "lens27i-10.inf" file and click the Open button. Click the OK button.

15. In the new window, select LENS27i-10 and click Next.

16. After the installation is complete, delete all downloaded files and close all windows.

17. Restart the system. The system will automatically select the maximum refresh rate and

corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.

Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a

refresh rate of 60 Hz.

3-5

Chapter 3.