Lenovo 61FC-MAR6-WW 사용자 설명서 - 페이지 30

{카테고리_이름} Lenovo 61FC-MAR6-WW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 61FC-MAR6-WW 45 페이지.
Lenovo 61FC-MAR6-WW에 대해서도 마찬가지입니다: 사용자 설명서 (46 페이지)

Caring for your monitor

Be sure to turn off the power before you perform any maintenance on the monitor.

Do not :

Apply water or liquid directly to your monitor.



Use solvents or abrasives.



Use flammable cleaning materials to clean your monitor or any other electrical equipment.



Touch the screen area of your monitor with sharp or abrasive items. This type of contact may



cause permanent damage to your screen.

Use any cleaner which contains an anti-static solution or similar additives. This may harm the



coating of the screen area.

Do:

Lightly dampen a soft cloth with water and use this to gently wipe the covers and the screen.



Remove grease or finger marks with a damp cloth and a little mild detergent.



After placing the monitor face down on a clean and soft surface, push the hook of the stand and lift

the stand up to remove it from the monitor .

Refer to the instructions that come with the VESA compatible base mounting kit.

1. Place the monitor face down on a non-abrasive surface on stable flat table.

2. Remove the stand.

3. Attach the mounting bracket from the wall mounting kit to the monitor.

4. Mount the monitor on the wall by following the instructions that come with the

base mounting kit.

Note: For use only with UL and GS Listed Wall Mount Bracket with minimum weight/load

bearing capacity of 6.00 kg. In order to fulfil TCO Certification for this wall mounting option,

shielded power cable is mandatory to be used. Attach the mounting bracket from the VESA

compatible wall mounting kit(100mm x100mm distance), the type of VESA mounting screw is

M4 x 10 mm.

Chapter 2. Adjusting and Using your monitor 2-12