Lenovo 62A2-GAR2-WW 사용자 설명서 - 페이지 19
{카테고리_이름} Lenovo 62A2-GAR2-WW에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo 62A2-GAR2-WW 41 페이지.
페이지 인쇄
Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1. Direct access controls
Using the USB Upstream Facing Port controls
This section describes the controls features for the USB Upstream Facing Port. There are have
two USB upstream facing ports, one is USB Type-C, and another is USB Type-B. You can using
one of the upstream facing ports to connect your computer.
•
Icon
Control
USB UFP switch Switch the USB upstream facing port.
1
DDC-CI
Exit
Input Change
2
Increase
Up
Brightness
3
Decrease
Down
Menu
4
Enter
The end users can using USB Type-C or USB Type B as USB upstream facing port, the
OSD on the monitor will pop up a message after being connected or being disconnected.
The message show as below.
USB TYPE-C plugged
USB Type-C Connect
USB TYPE-B plugged
USB Type-B Connect
Description
Press and hold for 10 seconds to enable or
disable the DDC-CI function.
Exit and return to previous level.
Switches the video input source
For increasing the value on adjustment bar
Up key function and up circle
Direct access to Brightness adjustment
For decreasing the value on adjustment bar
Down key function and down circle
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/
unlock menu
Press to enter next level on main menu/
sub menu status or enter previous level on
adjustment bar
USB TYPE-C unplugged
USB Type-C Disconnect
USB TYPE-B unplugged
USB Type-B Disconnect
2-3
Chapter 2.