Lenovo IdeaPad A1-07 사용자 설명서 - 페이지 5

{카테고리_이름} Lenovo IdeaPad A1-07에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo IdeaPad A1-07 36 페이지. Ideapad tablet a1-07 user guide v1.1 (traditional chinese)
Lenovo IdeaPad A1-07에 대해서도 마찬가지입니다: 하드웨어 유지 관리 매뉴얼 (50 페이지), 사용자 설명서 (24 페이지), 사용자 설명서 (35 페이지), (한국어) 사용자 설명서 (34 페이지), (독일어) 사용 설명서 (38 페이지), (덴마크어) 사용자 가이드 (37 페이지), (러시아어) (37 페이지), (폴란드어) 사용자 설명서 (35 페이지), 사용자 설명서 (32 페이지)

(for about 2-3 sec) to power on your IdeaPad Tablet A1-07.

•

After your IdeaPad Tablet A1-07 is powered on, press this

button to turn off the illuminated screen display. While the

screen display is off, press this button again to re-

illuminate the screen.

•

After your IdeaPad Tablet A1-07 is powered on, press and

hold this button (for about 2-3 sec) to bring up IdeaPad

Tablet A1-07 "Tablet options" pop-up box; select "Power

off" and press "OK" to shut down IdeaPad Tablet A1-07.

•

After your IdeaPad Tablet A1-07 is powered on, press and

hold this button (for about 6 sec) to forced shutdown.

Volume Button

•

Adjusts the volume.

Screen Rotation Lock Button

•

Toggle the button DOWN to lock the screen orientation, not

allowing screen rotation.

•

Toggle the button UP to unlock the screen orientation,

allowing screen rotation.

*SIM card socket

•

The SIM card slot is located on the lower left of the device

frame. In the Power off mode, insert the end of a sharp-

pointed object into the small hole above the socket until the

stopper pin pops out, and then insert the SIM card. To

remove the SIM card, in the Power off mode, push the SIM

card into the slot until it clicks, then pull it out.

1-3 Powering IdeaPad Tablet A1-07 On/Off

Powering IdeaPad Tablet A1-07 On

Press and hold the "Power" button on the upper right of IdeaPad

Tablet A1-07, and the Lenovo and startup screens display in

sequence, indicating that IdeaPad Tablet A1-07 has been powered

on.

Powering IdeaPad Tablet A1-07 Off

Press and hold the "Power" button on the upper right of IdeaPad

Tablet A1-07 until "Tablet options" displays on the screen, select