Lenovo IdeaCentre B300 공지 사항

{카테고리_이름} Lenovo IdeaCentre B300에 대한 공지 사항을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo IdeaCentre B300 4 페이지. Fc san switch
Lenovo IdeaCentre B300에 대해서도 마찬가지입니다: 하드웨어 교체 매뉴얼 (23 페이지), 제품 설명서 (23 페이지)

페이지 인쇄

Power cord notice

For your safety, Lenovo provides a power cord with a grounded attachment plug

to use with this product. To avoid electrical shock, always use the power cord and

plug with a properly groundedoutlet.

Power cords provided by Lenovo in the United States and Canada are listed

by Underwriter's Laboratories (UL) and certified by the Canadian Standards

Association (CSA).

For units intended to be operated at 115 volts: Use a UL-listed and CSA-certified

cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-conductor

cord, a maximum of 15 feet in length and a parallel blade, grounding-type

attachment plug rated 10 amperes, 125 volts.

For units intended to be operated at 230 volts (U.S. use): Use a UL-listed and

CSA-certified cord set consisting of a minimum 18 AWG, Type SVT or SJT, three-

conductor cord, a maximum of 15 feet in length and a tandem blade, grounding-

type attachment plug rated 10 amperes, 250 volts.

For units intended to be operated at 230 volts (outside the U.S.): Use a cord set

with a groundingtype attachment plug. The cord set should have the appropriate

safety approvals for the country in which the equipment will be installed.

Power cords provided by Lenovo for a specific country or region are usually

available only in that country or region.

For units intended to be operated in Germany: The power cords shall be safety

approved. For Germany, it shall be H05VV-F, 3G, 0.75 mm

, or better. For other

countries, the suitable types shall be used accordingly.

For units intended to be operated in Denmark: Use a cord set with a grounding-

type attachment plug. The cord set should have the appropriate safety approvals

for the country in which the equipment will be installed.

For units intended to be operated in Norway, Sweden, Finland: Use a cord set with

a two-prong attachment plug. The cord set should have the appropriate safety

approvals for the country in which the equipment will be installed.

Power cord notice