Lenovo ThinkSmart Hub 구성 매뉴얼 - 페이지 23

{카테고리_이름} Lenovo ThinkSmart Hub에 대한 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Lenovo ThinkSmart Hub 35 페이지. Epos expand capture 5
Lenovo ThinkSmart Hub에 대해서도 마찬가지입니다: 배포 매뉴얼 (13 페이지), 사용자 설명서 (10 페이지), 시작하기 (21 페이지), 하드웨어 유지 관리 매뉴얼 (48 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

ThinkSmart Hub Configuration Guide for Microsoft Teams Rooms (MTR)

Power Management

The ThinkSmart Hub comes equipped with an IR based human proximity sensor, which detects motion

directly in the line of sight of the sensor and a portion of surrounding areas. The sensor is placed in the

middle of the speaker grill, which is located underneath the integrated display.

The operating range of the sensor is 3 meters minimum and covers +/- 45-degree angle.

When the IR sensor does not detect any motion, the ThinkSmart Hub will put the integrated display and

any external display (if connected) into a supported standby mode. When the sensor detects motion,

the Hub will wake up the integrated display and any external displays that are connected to the Hub via

HDMI. Double-tap on the integrated display will also wake up the Hub and external displays if they are in

standby mode.

The MTR app runs 24/7 in the background even if the integrated display is in standby mode.

The ThinkSmart Hub does support HDMI CEC when used with ThinkSmart One Cable

The ThinkSmart Hub supports two modes of content sharing, Teams/Skype for Business session based

content share and wired HDMI based content share.

Teams content sharing

Teams or Skype for Business clients running from client devices such as smartphones, tablets, PCs, etc

can share their content and screen share through the Teams or Skype for Business session. When such

content is being shared, the ThinkSmart Hub will show the content on the external display that is

connected via HDMI to the Hub.

Note: This shared data is transient and the Hub does not store any user data on a permanent basis.

Wired HDMI content sharing

The HDMI IN port on the back of the ThinkSmart Hub provides the HDMI Ingest capability. Connecting an

HDMI cable to the HDMI IN port on the Hub and connecting the other end to the PC or other client

device will instantly show the content of the client device onto the connected external large display. This

essentially is duplicating (or extending) the screen of the client device onto the large screen.

Page 23 of 35