CTX PV880 사용자 설명서 - 페이지 7

{카테고리_이름} CTX PV880에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. CTX PV880 17 페이지. Ctx pv880: user guide

Start Your Installation

Connecting the Display

To setup this display, please refer to the following figure and procedures.

1. Be sure all equipment is off.

2. Connect the VGA signal cable from display input-A or display input-B

connector to the 15-pin connector of your host computer and tighten the

screws.

3. Connect the DC power cord to the power connector; plug one end of the

AC power cord into the power adapter, and then the other end into an

electrical outlet.

Power Adapter

Notice:

To ensure the LCD display can work well with your computer,

please configure the display mode of your graphic card to make it

less than or equal to 1280 x 1024 resolution and make sure

timing of the display mode is compatible with the LCD display.

We have listed the "Compatibility Modes" of this LCD display in

appendices for your reference.

Power Cord

Mac Adapter *

* For Macintosh, use the Mac adapter.

English

VGA Cable