Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8 IF 사용 설명서 - 페이지 8

{카테고리_이름} Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8 IF에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon AF-S Zoom-Nikkor ED70-200mm f/2.8 IF 13 페이지.

Notes on using vibration reduction

Wait until the image in the viewfinder stops vibrating before fully depressing the

shutter release button after you have lightly pressed the shutter release button.

When taking panning shots, be sure to set the vibration reduction mode switch to NORMAL.

If you move the camera in a wide arc when panning, vibration in the direction of that

movement is not affected. For example, if you pan the camera horizontally, only

vibration in the vertical direction is reduced, making smooth pans much easier.

Due to the characteristics of the vibration reduction mechanism, the image in the

viewfinder may become blurred after releasing the shutter.

Do not turn the camera power OFF while the vibration reduction mode is in operation.

Otherwise, the lens may emit a chattering noise if the camera is shaken. This is not a

malfunction. Turn the camera power ON again to correct this.

If the lens is removed from the camera while the vibration reduction mode is in

operation, the same thing may happen as stated above. Mount the lens and press the

shutter release button halfway to eliminate the chattering noise.

With F80-Series/N80-Series, F75-Series/N75-Series, F65-Series/N65-Series, D100

and D70 cameras, vibration reduction does not work while the flash is recycling.

When the lens is mounted on a tripod, set the vibration reduction ON/OFF switch to

OFF. However, set the switch to ON when using a tripod without securing the tripod

head, or when using a monopod.

If you set the AF start (AF-ON) button to ON on the body of cameras so equipped,

vibration reduction does not operate.

Focusing, zooming, and depth of field

First turn the zoom ring until the desired composition is framed in the viewfinder before

focusing. If your camera has a depth of field preview (stop-down) button or lever, depth

of field can be observed while looking through the camera viewfinder.

Because this lens does not have an aperture ring, you must set the aperture on the camera.

Taking flash pictures with cameras having built-in flash

When using the following cameras, check the focal length and shooting distance before

taking flash pictures to prevent vignetting since the light emitted from the flash may be

obstructed by the lens barrel.