Nikon D40X 매뉴얼 - 페이지 23

{카테고리_이름} Nikon D40X에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon D40X 26 페이지. Digital slr camera
Nikon D40X에 대해서도 마찬가지입니다: 사양 (4 페이지), 브로셔 (7 페이지), 브로셔 및 사양 (18 페이지), 브로셔 (8 페이지)

페이지 인쇄

Rear Curtain Sync. The camera

delays the ﬂash until just before

the shutter closes. This puts any

ghost images from the ambient

light caused by moving objects

behind the ﬂash image.

If you're using Auto, Portrait, or Close-Up

modes, hold down the Flash button and

spin the command dial to switch among

Auto Front Curtain Sync. This

option is similar to Front Curtain

Sync, but the ﬂash pops up auto-

matically.

Auto + Red-Eye Reduction.

This option is the same as Auto

Front Curtain Sync, with red-eye

reduction.

Off. The ﬂash does not ﬁre.

If you're using the Night Portrait mode, hold

down the Flash button and spin the com-

mand dial to choose

Auto + Slow Sync. This option is

similar to Slow Sync, but the ﬂash

pops up automatically.

Auto + Slow Sync + Red-Eye

Reduction. This option is the same

as Auto Slow Sync, but with red-

eye reduction.

Off. The ﬂash does not ﬁre.

Choosing Metering

Modes

The D40 or D40x can use any of three dif-

ferent exposure metering methods when it

is set to Program, Shutter Priority, Aperture

Priority, or Manual mode. Select the mode

by pressing the Info button, followed by the

Setting button. Then scroll to the metering

Chapter 1

Exploring the Nikon D40/D40x

mode section of the LCD display, press OK,

and choose the metering mode you want

from among

1.20

Adjusting ISO

Sensitivity

The D40/D40x can choose the sensitivity

setting (ISO) for you automatically, or you

can manually select an ISO setting. Press the

Info button, followed by the Setting button.

Then scroll to the ISO section of the LCD

Matrix. The camera examines 420

segments in the frame and

chooses the exposure according to

that information. With Type G and

D lenses the camera also incorpo-

rates distance range data.

Center-Weighted. The camera col-

lects exposure information over the

entire frame, but when it makes the

calculations, the camera emphasizes

the center area of the viewﬁnder.

Spot. The camera calculates expo-

sure entirely from the area indi-

cated by the active focus bracket.

(In other words, you can spot-

meter off-center subjects.)

Metering modes appear on the LCD.