Nikon D90 - Digital Camera SLR 체크리스트 및 운영 매뉴얼 - 페이지 12
{카테고리_이름} Nikon D90 - Digital Camera SLR에 대한 체크리스트 및 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon D90 - Digital Camera SLR 25 페이지. Focal digital camera
Nikon D90 - Digital Camera SLR에 대해서도 마찬가지입니다: 브로셔 및 사양 (9 페이지), 운영 매뉴얼 (20 페이지), 사양 (2 페이지), 사용자 설명서 (26 페이지), 매뉴얼 (28 페이지), 방법 (6 페이지), 매뉴얼 (30 페이지)
페이지 인쇄
Clear the memory by holding the Mark button down for 5 seconds. All
three status lights will illuminate sequentially. After all three lights have
blinked in sequence, release the mark button. The track memory should
now be erased.
It is also possible to erase the memory when the device is connected to a
computer via its USB cable. See the AMOD manual for more detail.
Power Button
1.7 The Multi Function Timer Remote Control
Some
aerial
photography
multiple photos be taken in accurate time-
sequence.
Obtaining
photographs of a road, shoreline or river is one
example. Another is imaging a large area with
multiple
photographs
dimensions. At the speed and altitude typically
flown by CAP aircraft, for these types of missions
the time between photographs is typically 4
seconds. The Multi Function Timer Remote
Control included with the D90 camera system kit
will automate the shutter release.
If your kit has a different timer than that shown in this section, refer to its manual for how
to accomplish the following.
Install two AAA batteries in the Timer Remote Control. The battery compartment access
is at the rear of the unit.
Turn the unit on.
The Timer Remote Control is able to operate in several
modes. The mode of interest for aerial photography is timed
interval (shown as IT on the front face of the unit). Two
settings must be defined for this mode; time between shutter
releases and total number of photos to be taken while in
automatic mode.
12
Mark Button
missions
require
multiple
overlapping
overlapping
in
two