Nikon D90 - Digital Camera SLR 매뉴얼 - 페이지 18

{카테고리_이름} Nikon D90 - Digital Camera SLR에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon D90 - Digital Camera SLR 28 페이지. Focal digital camera
Nikon D90 - Digital Camera SLR에 대해서도 마찬가지입니다: 브로셔 및 사양 (9 페이지), 운영 매뉴얼 (20 페이지), 사양 (2 페이지), 사용자 설명서 (26 페이지), 체크리스트 및 운영 매뉴얼 (25 페이지), 방법 (6 페이지), 매뉴얼 (30 페이지)

페이지 인쇄

Part I

Using the Nikon D90

When focus is achieved, the green

dot lights up; if the camera isn't in

focus, no dot is displayed. When

the camera attempts to ﬁ nd focus,

this indicator blinks.

AE Lock indicator. When this is lit,

you know that the Autoexposure

Lock button has been pressed.

FV Lock indicator. When the FV

Lock indicator is on, it means you

have locked in the ﬂ ash exposure

value. The ﬂ ash value can only be

locked when the Function (Fn) but-

ton has been set to do this.

Shutter speed display. This shows

how long your shutter is set to stay

open.

Aperture/f-stop display. This

shows what your current lens

opening setting is.

Electronic analog exposure dis-

play. Although Nikon gives this fea-

ture a long and confusing name, in

simpler terms, this is your light

meter. When the bars are in the

center, you're at the proper settings

for good exposure; when the bars

are to the left, you're underex-

posed; and when the bars are to

the right, you're overexposing your

image. This feature is especially

handy in getting the proper expo-

sure when using Manual mode.

When in P, S, and A mode, this

meter shows you the exposure

level when exposure compensation

is being applied.

Battery indicator. This icon dis-

plays how much of a charge

remains in the battery.

FEC indicator. When this is dis-

played, your Flash Exposure

Compensation is on.

WB bracketing indicator. This icon

is shown when your auto-bracketing

is set to white balance and bracket-

ing is turned on. You can change

the bracketing set in CSM e4.

Bracketing indicator. This icon

appears when auto-bracketing is

turned on.

Exposure compensation indica-

tor. When this appears in the view-

ﬁ nder, your camera has exposure

compensation activated and you

may not get a correct exposure.

Auto ISO indicator. This is dis-

played when the Automatic ISO

setting is activated to let you know

that the camera is controlling the

ISO settings.

ISO sensitivity indicator. This tells

you what the ISO sensitivity is cur-

rently set to.

Remaining exposures. By default,

this set of numbers lets you know

how many more exposures can ﬁ t

on the SD card. The actual number

of exposures may vary according to

ﬁ le information and compression.

When the Shutter Release button is

half-pressed, the display changes to

show how many exposures can ﬁ t

in the camera's buﬀ er before the

buﬀ er is full and the frame rate

slows down. The buﬀ er is in-camera

RAM that stores your image data

while the data is being written to

the memory card. When recording

a WB preset, this ﬂ ashes PRE. When

setting Flash Exposure