Nikon MD-15 사용 설명서 - 페이지 10

{카테고리_이름} Nikon MD-15에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon MD-15 18 페이지. Motor drive

FILM REWINDING

When the roll of film in the camera has been fully exposed, the

MD-12's motor will automatically stop, releasing film tension,

with the pilot lamp remaining lit. Turn the power switch off to

prevent unnecessary battery drain. Then, push the rewind slide

on the motor drive up. Rewind the film normally. See your

camera's instruction manual for details.

If at any time you wish to manually advance the film without

removing the MD-12 from the camera, turn off the motor drive's

power switch after it has finished advancing the film from the

previous exposure. Then, in the case of the FM (Serial No. be-

low 3,000,000), turn the mode selector switch so that the black

line (white, on black camera bodies) is adjacent to the line on

the camera body. As for the FM (Serial No. over 3,000,000) or

the FE, it switches automatically from motor drive to manual

film advance operation when the motor drive is switched off.