Nikon MD-4 사용 설명서 - 페이지 11

{카테고리_이름} Nikon MD-4에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon MD-4 23 페이지. Motor drive

CONTROLS IN DETAIL

At "C" (Continuous)

As long as you hold the trigger button down, shots

will be taken rapidly in succession. Any shutter

speed setting, except "B" and "T," can be used. At

shutter speeds slower than 1/125 sec., the firing

rate automatically slows down to match the shut-

ter speed in use.

Motor-driven multiple exposures are possible by

holding the multiple exposure lever in position

while firing off a short burst (see the picture

above). After you're finished, make a blank shot

by covering the lens with a lens cap. This will

advance the film to the next unexposed frame without

adding another shot to the multiple exposure just

completed.

Caution: Do nat hold down the backup mechanical release lever

while shooting on Continuous, as the shutter will not open prop-

erly.

continued

At "L" (Loc)

The trigger button is locked and the motor drive

will not operate. However, by turning on the

camera's power switch, you can use the shutter

release button to trip the shutter and advance

the film manually just as if the MD-4 were not

attached.

Distributed by WWW.LENSINC.NET