Nikon A1R Series 설정 매뉴얼
{카테고리_이름} Nikon A1R Series에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon A1R Series 2 페이지. Setting kohler for dic
페이지 인쇄NIKON A1R – SETTING KOHLER FOR DIC
SYSTEM START UP
1. Turn on the laser unit
o Press button on left side
o Turn Key on Middle box of unit
o The light will stop blinking when the laser unit is ready
2. Turn on the Surge protector at the back of the microscope table
3. Turn on the computer
4. Turn on the software – NIS Elements AR 4.51.00
SETTING KOHLER
5. Select the DIC button - light to the eye pieces.
6. Make sure the GIF slider is out of the light path – light through eye piece will appear green
if the GIF slider is pushed in.
7. Under the Lamps option – control brightness
o To turn off the light, click the green rectangle – turns red when light is off
8. Close down the F stop (turn dial to the left).
F stop
GIF Slider