Nikon SMZ1000 사용 설명서 - 페이지 6

{카테고리_이름} Nikon SMZ1000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon SMZ1000 40 페이지. Stereoscopic zoom
Nikon SMZ1000에 대해서도 마찬가지입니다: 사용 설명서 지침 (42 페이지)

1. Installation location

Note the following points when installing the stereoscopic

microscope.

• Install the microscope in a location with the temperature between

0° and 40°C, and humidity of less than 80%. If installed in a hot

and humid location, mold may form on the lenses or condensation

may occur inside, resulting in reduced performance or damage to

the microscope.

• Do not install the microscope in a location subject to direct

sunlight.

• Install the microscope in a location that is not subject to vibration.

• Install the microscope in a location that is free from dust and dirt.

2. Handle the microscope carefully

The stereoscopic microscope is a precision optical instrument.

Handle it carefully and do not subject it to impact. Shock from

impact during transportation or operation as well as forcible

operations may cause damage to the instrument.

3. Cleaning the lenses

Do not let dust, fingerprints, etc. to get on the lenses. Dirt on the

lenses will adversely affect the view of the image. If any lenses

become dirty, clean them as described below.

• Use an air blower to blow dust away. If this does not suffice, brush

away the dust with a soft brush or gently wipe it away with a piece

of gauze.

• Only if the lenses become dirty with fingerprints or grease stains,

slightly dampen a piece of soft, clean cotton cloth with absolute

alcohol (ethyl alcohol or methyl alcohol) and gently wipe away the

dirt. Do not use the same part of the cloth more than once.

• Since absolute alcohol is highly flammable, be careful in handling

it so that it does not ignite.

• Observe the manufacturer's handling instructions when handling

absolute alcohol.