Nikon 7487 - Team Realtree Laser 1200 Rangefinder 사용 설명서
{카테고리_이름} Nikon 7487 - Team Realtree Laser 1200 Rangefinder에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon 7487 - Team Realtree Laser 1200 Rangefinder 2 페이지. Instruction manual
페이지 인쇄
Nikon Monarch Gold LASER1200
Instruction Manual
Laser Rangefinder
Thank you for purchasing the Nikon Laser 1200.
This high-spec laser rangefinder has a waterproof design in
order to be used for sports, leisure and other outdoor
situations. The Nikon Laser 1200 also supports the measuring
accuracy of existing Nikon Laser Rangefinders.
Please observe the following guidelines strictly so you can use
the equipment properly and avoid potentially hazardous
problems. Before using this product, read thoroughly the
"SAFETY PRECAUTIONS" and instructions on correct usage
accompanying the product. Use of controls or adjustments or
performance of procedures other than those specified herein
may result in hazardous radiation exposure.
Keep this manual within reach for easy reference.
• Measuring range: 10m-1,100m/11 yards-1,200 yards
• Distance measurement display:
0.5m/yard (<1,000m/yards)
1m/yard (≥1,000m/yards)
• Easy-to-aim 7x optical observation system
• Backlight LCD for situations with little or no light.
• Target Priority Switch System allows you to easily match the
measuring situation with one of the two Priority Systems
provided
• Waterproof design (NOT designed for underwater usage)
• Invisible/Eyesafe FDA Class I Laser
• 8-second results display
• Compact, ergonomic design
• Automatic shut-off (after approx. 8 sec. unattended)
• Default to "Last Use" settings
• 20-second continuous measuring function
• Diopter adjustment function
The Nikon Laser 1200 emits invisible, eyesafe, infrared
energy pulses that reflect off the selected target back to its
optical receiver. Sophisticated precision charge circuitry is
used to instantaneously calculate distances, by measuring
the time it takes for each pulse to travel from the
rangefinder to the target and back. The maximum range of
the instrument depends on the reflectivity of the target, its
color, surface finish, size and shape.
CAUTIONS BEFORE USE
Please observe the following guidelines strictly so you can use
the equipment properly and avoid potentially hazardous
problems. Before using this product, read thoroughly the
"SAFETY AND OPERATION PRECAUTIONS" and instructions on
correct usage accompanying the product. Keep this manual
within reach for easy reference.
w WARNING
This indication alerts you to the fact that any improper use
ignoring the contents described herein can result in potential
death or serious injury.
w CAUTION
This indication alerts you to the fact that any improper use
ignoring the contents described herein can result in potential
injury or material loss.
SAFETY AND OPERATION PRECAUTIONS
w Warning
• Never look directly at the laser beam or directly at the sun
when using the Nikon Laser 1200.
• Do not depress the POWER button while aiming with the eye
or looking into the optics from the objective side.
• Do not operate the unit with other additional optical elements,
such as lenses or binoculars. Using an optical instrument
together with the Nikon Laser 1200 increases the danger of
damaging the eyes.
• Do not disassemble the Nikon Laser 1200. A product that has
been disassembled is not guaranteed by the manufacturer.
• If the Laser 1200's body cover is damaged, or if it emits a
strange sound due to dropping or for some other cause,
immediately remove the battery and stop using.
w Cautions
• When not using the Nikon Laser 1200, do not push the POWER
button.
• Do not leave the Nikon Laser 1200 within the reach of small
children.
• Rain, water, sand or mud should be removed from the
rangefinder body surface as soon as possible, using a soft,
clean, dry cloth.
• Although the Nikon Laser 1200 is waterproof, it is not designed
for use underwater.
• Do not swing the Nikon Laser 1200 by its strap. It may hit
someone and cause injury.
• Do not leave the Nikon Laser 1200 in an unstable place, as it
may fall and cause injury, or damage the equipment.
• Do not look through the Nikon Laser 1200 while walking. You
may walk into something and get hurt.
• Do not leave the Nikon Laser 1200 in a car on a hot or sunny
day, or near heat-generating equipment. This may damage or
negatively affect it.
• Do not leave the Nikon Laser 1200 in direct sunlight. Ultraviolet
rays and excessive heat may negatively affect or even damage
the unit.
• When the Nikon Laser 1200 is exposed to sudden changes in
temperature, water condensation may occur on lens surfaces.
Do not use the product until the condensation has evaporated.
• Do not use alcohol for cleaning the main body.
Nikon Team REALTREE
LASER1200
• Specifications and design are subject to change without
notice.
• No reproduction in any form of this manual, in whole or in
part (except for brief quotation in critical articles or reviews),
may be made without written authorization from NIKON
VISION CO., LTD.
Key Features
The following factors ensure best range and accuracy:
• Nighttime use
• Cloudy weather
• Bright-colored targets
• Targets with highly reflective surfaces
• Targets with shiny exteriors
• Large-size targets
• Shooting targets facing at 90 degrees
Measurement may result in inaccuracy or failure in the
following cases:
• Slender or small target
• Target has diffusing reflective surface
• Target does not reflect the laser beam (glass, a mirror, etc.)
• Black target
• Target has pronounced depth
• In snow, rain or fog
• Target measured through glass
• Reflective surface measured from diagonal direction
• Moving target
• Obstacle moving in front of the target
• When targeting the surface of water
• Do not leave the polyethylene bag used for packaging within
the reach of small children.
• Be careful that small children do not inadvertently swallow the
eyecup. If it does happen, consult a doctor immediately.
• If you use the rubber eyecup for a long period of time, you may
suffer skin inflammation. If you develop any symptoms, consult
a doctor immediately.
• When carrying the Nikon Laser 1200, store it in the soft case.
• If your Nikon Laser 1200 should fail to operate correctly,
discontinue use immediately and consult the Troubleshooting
Table. If you are unable to fix the problem, contact your local
dealer for instructions on where to send it for repair.
CARE AND MAINTENANCE
Lenses
• When removing dust on the lens surface, use a soft oil-free
brush.
• When removing stains or smudges like fingerprints from the
lens surface, wipe the lenses very gently with a soft clean
cotton cloth or quality oil-free lens tissue.
Use a small quantity of pure alcohol (not denatured) to wipe
stubborn smudges. Do not use velvet cloth or ordinary tissue,
as it may scratch the lens surface. Once the cloth has been
used for cleaning the body, it should not be used again for the
lens surface.
Main body
• Clean the body surface with a soft, clean cloth and a dry cloth.
Do not use benzene, thinner, or other organic agents because
they may cause discoloration or rubber degeneration.
Storage
• Water condensation or mold may occur on the lens surface
because of high humidity. Therefore, store the Nikon Laser
1200 in a cool, dry place.
After use on a rainy day or at night, thoroughly dry it at room
temperature, then store in a cool, dry place.
NOTES ON LITHIUM BATTERY
If handled incorrectly, battery may rupture and leak, corroding
equipment and staining clothing. Be sure to observe the
following:
• Install battery with the + and – poles positioned correctly.
• Battery should be removed when exhausted or during
extended periods of non-use.
• Use the same type of battery.
• If battery fluid contacts eyes or skin, rinse well with water. If
swallowed, consult a doctor immediately.
• Do not short-circuit battery chamber terminals.
• Do not carry batteries together with keys or coins in a pocket
or bag. This may overheat and short-circuit batteries.
• Do not put batteries in fire or water. Never disassemble
batteries.
• Do not charge batteries.
• Do not subject stored batteries to extremes in temperature.
• Do not subject batteries to strong vibrations or shock.
NIKON VISION CO., LTD.
3-25, Futaba 1-chome, Shinagawa-ku, Tokyo 142-0043, Japan
E
4
3
1
2
!w
!q
!p
1. [
] — Reticle (aiming system)
Use to take aim at the target. Position the target at the center of the reticle, which will
always appear in the display.
[
] — Laser applying mark
Appears at the same position as the reticle, indicating that the laser is being applied for a
measurement. (Also remains present during continuous measuring.)
[
] — Appears while measuring.
2. [888.
] — Distance/measurement status display
8
Digitally indicates measured distance in meters/yards. Also indicates measuring status such as
"Measurement in progress", "Measurement unsuccessful" or "Unable to measure".
Display of results: (<1,000m/yards)
Display of results: (≥1,000m/yards)
[=] — Now measuring
[- - - -] — Failure to measure or unable to measure distance
3. [
] — Indicates distance being measured in meters.
4. [
] — Indicates distance being measured in yards.
5. [
] — First Target Priority display
Appears when the First Target Priority is selected. Does not appear when Distant Target Priority is selected.
6. [
] — Indicates battery condition. (See "Changing Batteries")
Although the LCD was produced using the most advanced technology, it is impossible to eliminate dust completely. When using this
product, the LCD is magnified by high magnification of the eyepiece lens and dust may appear as a defect. It will not, however, affect
measurement accuracy.
• Type of battery: 3V CR2 lithium battery
• Battery condition indicators
:
Battery has enough charge for use.
:
Battery charge is getting low.
flashing:
Battery charge is low and battery should be replaced.
disappears:
Battery is exhausted and should be replaced.
flashing in the LCD indicates that the battery should be replaced.
1 Open the battery chamber cover
Insert a coin or similar item into the slot in the battery chamber cover, and rotate it following the "Open/Close" indication. The cover
may not open easily due to its O-ring seal for water and dust resistance.
2 Replace the old battery with a new one
Install new battery with the [+] and [-] correctly positioned following the "Battery installation" indication seal in the battery
chamber. (Insert battery positioning the [+] pole towards the inside of the chamber.) [The Laser 1200 will not operate if the battery
is installed incorrectly.]
3 Close the battery chamber cover
Screw the cover back in place using a coin or similar item. The cover may not close easily due to the O-ring seal for water and dust
resistance. Confirm that the cover is correctly closed.
• Battery life
Continuous operation: Approx. 5,000 times (with backlight off at 20°C)
Target focusing, measurement, and automatic power off are included in a single cycle. This figure may differ according to
temperature, and other factors such as target shape, color, etc.
* The Laser 1200 comes with a 3V CR2 lithium battery. However, due to natural electric discharge, the life of the battery will likely be shorter than that
noted above.
Replace battery if the Laser 1200 is ever submerged in water or if water enters the battery chamber.
Body ..................................................................................x1
Soft case (CAS) ...............................................................x1
Neckstrap ........................................................................x1
Lithium battery (CR2) ..................................................x1
Nomenclature
1 Monocular objective lens/Laser emission aperture
2 Laser detector aperture
3 MODE button
4 POWER button
5 7x monocular eyepiece
6 Eyecup/diopter adjustment ring
7 Diopter index
8 Strap eyelet
9 Battery chamber cover
5
!p Battery chamber cover "Open/Close" indication
!q Tripod socket
!w Product number/explanatory label
6
7
8
Laser 1200
9
Status of the Internal Display
e.g. 576.5 yards = [
]
e.g. 1,055m = [
]
Changing Battery
Composition
Printed in China (165K)5E/1204