Nikon ARROW ID 3000 사용 설명서 - 페이지 7

{카테고리_이름} Nikon ARROW ID 3000에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon ARROW ID 3000 19 페이지.
Nikon ARROW ID 3000에 대해서도 마찬가지입니다: 사용 설명서 (36 페이지)

[Mode settings]

Factory default setting is yard (YD).

1. Turn on the power (Confirm the internal display is on).

2. Press and hold the MODE button for more than 2 seconds.

When the display unit has been switched, release the button.

This Nikon Laser Rangefinder employs the First Target Priority/Distant Target Priority switching system.

(Factory default setting is First Target Priority mode).

1.Turn on the power (Confirm the internal display is on)

2. Press and hold the MODE button, then depress and hold the PWR button within 0.5 second.

Continue to press and hold both button (more than 2 seconds) until First Target Priority mode and

Distant Target Priority mode are switched.

3. Release both buttons when the mode is switched.

*If the buttons are not pressed in the correct order, switching will not take place.

[First Target Priority mode/Distant Target Priority mode]

When measuring overlapping subjects:

First Target Priority mode displays the distance of the closest subject and

Distant Target Priority mode displays that of the farthest subject.

Horizontal Distance mode and Actual Distance mode can be switched.

(Factory default setting is Horizontal Distance mode.)

1. Turn on the power (Confirm the internal display is on).

2. Press and hold the MODE button, then immediately (less than 0.5 secnd) depress the PWR button for less

than 2 seconds.

3. Release your finger from the PWR button to switch the Measrurement display mode.

*If the buttons are not pressed in the correct order, switching will not take place.

Horizontal Distance mode

Horizontal

Distance

N/A

Actual Distance mode

Actual

N/A

Distance