Nikon Forestry Pro 사용 설명서 - 페이지 16

{카테고리_이름} Nikon Forestry Pro에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Nikon Forestry Pro 19 페이지.
Nikon Forestry Pro에 대해서도 마찬가지입니다: 사용자 설명서 (48 페이지)

페이지 인쇄

Troubleshooting/Repair

If your Nikon Laser Forestry Pro should require repair, please contact your local dealer for details regarding

where to send it. Before doing so, you are advised to consult the Troubleshooting Table below.

Symptom

Unit does not turn

on — LCD fails to

illuminate

Target range cannot

be obtained

[- - -] ("Cannot

measure") appears

Closer target cannot

be measured

Target beyond a

certain distance

cannot be measured

Check Points

• Depress POWER button.

• Check and replace batteries if necessary.

• Be sure that nothing, such as your hand or finger, is

blocking the laser emission aperture and laser detector.

• Be sure that the laser emission aperture and laser detector

are clean. Clean them if necessary.

• Be sure that the target shape and condition is appropriate

to reflect the laser beam.

• Replace battery.

• Be sure to hold the unit steady while depressing the

POWER button.

• Be sure the target is within measuring range (10-500m/11-

550 yards/33-999 feet)

• Be sure that nothing, such as leaves or grass, is between

the Nikon Laser Forestry Pro and the target.

• Be sure that nothing, such as leaves or grass, is between

the Nikon Laser Forestry Pro and the target.

Symptom

• Replace battery.

Measurement result is

• Be sure that the target shape and condition is appropriate

unstable

to reflect the laser beam.

• Be sure to hold the unit steady while depressing the

POWER button.

• Be sure that nothing, such as leaves or grass, is between

the Nikon Laser Forestry Pro and the target.

• Replace battery.

Incorrect result is

• Be sure that the target shape and condition is appropriate

displayed

to reflect the laser beam.

• Be sure that nothing, such as leaves or grass, is between

the Nikon Laser Forestry Pro and the target.

If problems persist after consulting the Troubleshooting Table, please contact your local dealer to check/repair the

Laser Forestry Pro. Never let anyone than the official representative of the product manufacturer check or repair the

Laser Forestry Pro. Failure to follow this instruction could result in injury, or damage to the product.

Check Points

Nikon